Same or next day when a technician is free
GE Oven and Range Repair in Wesley Chapel, FL
An unfamiliar message, a changed cooking result or an oven that will not start: tell us what your GE displays and what happened just before it stopped. The complete model number helps us separate an operating setting from a fault.
What customers say about us
4.9 out of 5 from 155 reviews on Google
Read all customer reviews
-
SOS was very responsive to my request to schedule service, and they were able to come out the very next day. Our technician, Anton, was both knowledgeable and professional. He took the time to carefully evaluate the issues with our oven and clearly explain his findings, along with his recommendation on how to proceed. We felt very comfortable and confident moving forward with his recommendation. We would definitely use SOS again and highly recommend them.
Susan S.Oven Repair -
SoS to the rescue. Fast efficient service. Very knowledgeable of G.E. Appliances. Quick diagnostic test and then ordered parts. Two days later my microwave was bavk in working order .
Pamela B.Microwave Repair -
It was great service from Antonio. On time, very kind and careful, not expensive for this hard wotk. I wanted to buy brand new stove, but he said “no, I will fix it” and he did it! Thank you my friend! And thanks for keep my kitchen clean 👍🏻
Elveg B.Stove & Cooktop Repair -
Good company, and very easy to work with. They responded to my request for service immediately, and were able to make an appointment that fit my schedule. Anton is very professional and showed up on time and fixed my problem without any trouble. Nice, knowledgeable, and punctual company.
Andrew C.Google review -
Great experience 👍
Bruce H.Google review -
I had an excellent experience with Anton, the owner and also one of 3 techs for the company. My refrigerator freezer compartment was getting condensation along the interior ledge. Anton identified the source of my problem right away and discussed the solution and cost upfront with me. He also told me an important way to preserve the life of my particular fridge and explained how to do it or I could have him do it. For a nominal fee, he cleaned the compressor coil and saved me the trouble. I found his services extremely professional, knowledgeable, and with excellent communication from the first phone call to completion. Will definitely use again!!
Dr. P.Refrigerator Repair -
Thrilled to have found a local appliance repair man! Anthony is a super nice guy. Very professional. Very knowledgeable! I would not hesitate to refer him to my friends and family.
Patricia M.Google review -
Great service and quick response. Very pleasant service. I highly recommend them.
Joseph D.Google review -
My refrigerator stopped cooling, and it turned out the compressor had failed. Antony came the same day I called, quickly diagnosed the problem, and had everything he needed right in his truck . He replaced the compressor on the spot — no waiting, no delays. I’ve never had a fridge repaired this fast before. Fair pricing, great service. Highly recommend!
Vladimir K.Refrigerator Repair -
Anton was exceptional thoughtful and knowledgable. Very efficient and respectful
Robert R.Google review - Read customer reviews from our customers on Google
The GE name is the start. The model guides the repair.
We assess GE, GE Profile, Cafe and Hotpoint ovens and ranges, including older General Electric appliances. Their controls, heating systems and replacement parts are not interchangeable simply because they belong to the same appliance family.
A photo of the rating label and the complete display message is more useful than a guessed part name. Include whether the problem affects Bake, Broil, convection or a particular cavity. For premium built-in equipment, see our high-end oven repair page.
What changed on your GE oven?
A fault message keeps returning
Signs
Letters or numbers appear during cooking or when a mode is selected.
Usual causes
Record the entire message and cooking mode. The model-specific fault information guides testing. The display alone does not authorize a replacement part.
Keys beep but cooking will not start
Signs
The clock works, yet the expected cooking command is rejected.
Usual causes
Check the owner manual for control lock and required start steps. Persistent unresponsive keys need assessment after the operating state is established.
The door stays latched
Signs
The oven has cooled after cleaning, but the door still will not release.
Usual causes
Leave the handle and latch unforced. Tell us whether the display says LOC, LOC DOOR or Unlock Door. Those messages are not interchangeable.
A familiar recipe now cooks differently
Signs
The same food and cookware produce a noticeably different result.
Usual causes
Compare the selected mode, rack position and temperature units before changing calibration. A repeated difference needs a measured assessment of heating and control.
Bake and Broil behave differently
Signs
One selected mode heats while another does not.
Usual causes
This helps narrow the checks without proving that a particular element, igniter or relay has failed. Describe what the oven actually did in each mode already used.
The problem began after installation
Signs
The range behaves incorrectly after moving, connecting or replacing it.
Usual causes
Report that timing at booking. A supply or installation issue needs a different response from an established appliance fault. Do not open electrical connections yourself.
Photograph the label before ordering a part
A sales name such as Profile or a description such as 30-inch GE is not a complete model number. Include every letter and digit on the appliance label, along with the serial number if readable. The model number decides which parts fit, whatever the control panel looks like.
Use GE range label locations or the GE model locator for your appliance type. Only inspect an accessible label with the appliance cool. Do not pull out a range or release a built-in oven just to find it.
What common GE oven messages mean
LOC and a locked keypad
On models with control lock, LOC can describe an enabled feature. Use the instructions for that exact control. There is no universal button combination.
A door-related message
LOC DOOR or Unlock Door calls for attention to the selected cycle, cooling state and latch. A control lock and a physically stuck door are different observations.
An F-code during operation
Write down the full code before it disappears, including any extra digits. Report when it occurred and whether heating stopped. Resetting it again and again leaves the cause in place.
Bad Line after connection
GE identifies Bad Line as an incorrect electrical connection. Arrange an assessment by the installer or an electrician.
Reference: GE fault and function messages. GE notes that its summary does not cover every past and present model.
A lower convection setting can be intentional
On equipped models, Auto Recipe Conversion can reduce the entered baking temperature for convection cooking. That feature is not the same as an oven losing heat. Check which cooking mode and conversion setting were active before comparing the displayed number with a conventional recipe.
Keep a useful record: recipe temperature, selected mode, rack position, cookware and the actual result. Avoid repeatedly changing calibration to compensate for an unexplained fault.
See GE special-feature settings and GE cooking-temperature guidance for model-dependent details.
From the reported message to a checked result
- Identify the applianceRead the model and establish the affected mode, display message and recent changes.
- Test the relevant systemCheck the operating state and investigate the fault using the appliance-specific information.
- Explain the proposed repairReview findings, scope and estimate with you before proceeding with repair work.
- Check the affected functionVerify operation after the work and explain the result, settings and any remaining issue.
Choose the page that matches the equipment
Our gas oven page covers ignition symptoms, while electric oven repair explains supply and heating checks. Cabinet access is covered under wall oven repair. Replacement installation belongs under oven and range installation.
If an oven lights with a bang, stop using it and arrange service. If you smell raw gas, leave the area without operating electrical switches and contact the gas supplier or emergency service from outside. Do not run another cycle to capture a fault code.
For the broader service overview, return to oven and range repair.
Oven brands we repair
What you get with every repair
90-day labor warranty
Labor on every repair is covered
for 90 days. Parts carry the
manufacturer warranty, 1 to 12 months.
No hidden fees,
upfront prices
You approve the price
before we start the repair.
One team for every
appliance at home
Repair, maintenance and installation
for most major appliance brands.
Send the model and describe the work you need.
Appointments and replacement parts
Ask about available appointments. Completion depends on the fault and availability of the required parts.
Appliance repair discounts and coupons
Save on appliance repair in Wesley Chapel, Tampa and nearby cities. Pick an offer and mention it when you book.
$40 off Two appliances in one visit
20% off Preventive appliance maintenance
$30 off Senior appliance repair discount
Special pricing Appliance repair for landlords and property managers
$69 credited Diagnostic fee credited toward your repair
Other Appliance Repair Services
Areas we serve
Our technicians are based in Wesley Chapel and cover 21 communities across Pasco, Hillsborough, Pinellas and Citrus counties.
- Wesley Chapel
- Tampa
- Brandon
- Cheval
- Citrus Park
- Dade City
- Dover
- East Lake
- Homosassa
- Keystone
- Land O' Lakes
- Lutz
- Odessa
- Oldsmar
- Plant City
- San Antonio
- Seffner
- Trinity
- Valrico
- Westchase
- Zephyrhills
Neighborhoods
- New Tampa
- Tampa Palms
- Seven Oaks
- Connerton
Our base in Wesley Chapel Communities we serve
Don't see your community? We serve nearby areas too. Call (786) 650-0707 and ask.
GE settings, labels and repair questions
Does LOC mean the control board has failed?
Not necessarily. It can indicate control lock on equipped models. Check the model instructions. Report persistent trouble or a different door-related message instead of assuming the panel needs replacement.
Should I order the part named in an online code chart?
Wait for a model-specific assessment. Code summaries describe possible fault areas, and versions of similar ovens can use different systems. The complete code, model and test findings determine the repair.
Why is the convection temperature lower than I entered?
An enabled automatic recipe-conversion feature may account for the change on some models. Verify the cooking mode and settings in the owner manual before treating the displayed reduction as a heating fault.
Can you assess an older General Electric oven?
Send the full model, symptoms and a photo of the controls. We can discuss the assessment. Repair options depend on the condition, required work and availability of the correct parts.
Do I need to move the range to find the label?
Do not move it just for booking. Check the manufacturer locator for an accessible position with the appliance cool. If the label cannot be reached safely, send the appliance and control-panel photos you can obtain.
The code vanished after a reset. Is it repaired?
The cause can remain after the display clears. Keep the original message and circumstances for the assessment, especially if the fault returns. Stop using an appliance that shows overheating, ignition or electrical trouble.
Updated
