Gas, radiant and induction cooking
Stove and Cooktop Repair in Wesley Chapel, FL
Tell us which burner or zone changed, whether the problem affects one area or the whole cooktop, and what happened just before it began. Those details help us plan the right checks for your cooking surface.
What customers say about us
4.9 out of 5 from 155 reviews on Google
Read all customer reviews
-
On time, fast diagnosis, parts on hand and a pleasure to meet. Will definitely call again. Thank you
David C.Google review -
Punctual and the technician had the problem resolved same day. He is very knowledgeable, efficient, professional and personable. I highly recommend and will use this service again but like the tech said, "hopefully you wont need too.'"
Deborah K.Google review -
Knowledgeable, friendly and professional service. I will recommend you in the future.
Frank D.Google review -
Great guy, came, very professional spoke very respectful great job in a timely manner will call him again when I need him would recommend him to everyone
Lisa S.Google review -
Anton was exceptional thoughtful and knowledgable. Very efficient and respectful
Robert R.Google review -
Antony was very professional, courteous and honest. He diagnosed and fixed my issue and I thought his price was fair. Would highly recommend.
Robin N.Google review -
Outstanding Service!! Superior knowledge and experience!! Reasonably affordable (& Honest 😃)
HelloGoogle review -
Great service. Very prompt and explained everything. Definitely will use in future
Jeff P.Google review -
Fast and responsive!
Derek J.Google review -
By far the best customer service and same day service! Thank you for taking such good care of my elderly grandparents! We will be calling you for all our needs!
Nicole L.Google review - Read customer reviews from our customers on Google
Start with the surface and the symptom
Gas burners, electric coils, radiant glass tops and induction zones can look familiar while working in different ways. A cold zone, continued clicking and a cracked surface need different assessments.
We repair cooktops and the surface-cooking section of ranges. The oven has its own oven and range repair page. For a replacement electric appliance, see installation planning.
The photographs show a GE JGP5030SLSS gas cooktop with five burners. They show its installed layout and a visual assessment. They do not show a finished repair.
Types of stoves we repair
Describe the change at the cooking surface
A gas burner will not light
What you notice
Clicking occurs without the usual ignition, or there is no spark response.
What we assess
The timing, recent cleaning and correct burner assembly guide the checks. A clicking sound alone does not prove that a spark module has failed.
Clicking continues after use
What you notice
An igniter keeps clicking with the controls apparently off.
What we assess
Report any recent spill or cleaning. Control position, moisture and the ignition system need consideration for that model.
One electric zone stays cold
What you notice
A particular coil or glass-top zone no longer heats while others still work.
What we assess
We assess the affected heating circuit, controls and connections to identify the failed component.
An induction zone does not detect a pan
What you notice
The zone flashes, stops or will not start with the selected cookware.
What we assess
Cookware compatibility, magnetic base size, placement and settings are checked before the appliance electronics are blamed.
Heat control has changed
What you notice
A familiar setting produces unusually strong heat or the zone does not respond as expected.
What we assess
Distinguish normal heat cycling from loss of regulation. Stop using a zone that cannot be controlled and describe the behavior when booking.
The surface or controls are damaged
What you notice
Glass is cracked, a knob is loose or the touch panel no longer responds normally.
What we assess
Physical condition and the model determine the repair options. Leave a cracked cooking surface unused until it has been assessed.
Choose the right cooking-surface service
Gas burners
Ignition, burner assembly and surface-control concerns. Gas stove repair covers this system.
Coil and radiant electric
Heating and regulation on exposed coils or beneath glass. See electric stove repair.
Induction zones
Pan recognition and power delivery need induction-specific checks. See induction cooktop repair.
A change after cleaning is useful evidence
GE identifies moisture and incorrectly matched or positioned burner parts as possible contributors to ignition trouble. Tell us which pieces were removed and whether the problem began immediately after cleaning.
That history does not rule out a component fault. Use the exact model instructions for removable parts and leave internal access to service. Reference: GE gas-burner ignition guidance.
Glowing and cycling are not the same as a fault
Electric surface elements can cycle on and off as part of normal heat regulation. A change in cooking performance matters more than expecting a radiant ring to glow continuously.
Report the selected setting, pan and result. See GE guidance on surface-element cycling.
For induction, describe the pan as well as the zone
A magnetic base is part of the compatibility check, but its size and position also matter. The magnetic area can be smaller than the outside diameter of the pan. A zone may not activate if that area is too small.
Tell us whether the same cookware previously worked on the affected zone and whether other suitable pans behave differently. Do not run repeated tests on a damaged surface. Reference: GE induction cookware guidance.
From the affected zone to a checked result
- Describe the configurationIdentify gas, electric or induction, the full model and the affected burner or zone.
- Assess the reported changeCheck the relevant controls, heating or ignition system and explain the findings.
- Agree and carry out the workReview the repair estimate, compatible parts and any access requirement before approved work.
- Verify operationCheck the repaired function and explain the result, follow-up or remaining limitation.
Preparing for a cooktop appointment
- Let the surface cool and remove loose cookware from the work area.
- Keep the full model and any existing error message available.
- Mention spills, cleaning, electrical interruptions or recent installation.
- Leave the appliance in place and do not open panels or alter connections.
If you smell gas, leave the building and contact the gas utility or emergency services from outside. Do not operate switches or continue trying to ignite a burner. A gas-supply emergency must be addressed before a routine repair appointment.
Repair scope, estimates and coverage
We assess the fault, condition, access and compatible parts before discussing repair versus replacement. A fixed parts-price ranking or universal age cutoff would not describe every model fairly.
The $69 diagnostic is credited toward an approved repair. Labor carries a 90-day warranty. Appointment availability and applicable offers are confirmed when booking. See offers and service questions. SOS provides independent service, so confirm any manufacturer or plan coverage before arranging paid work.
Stove brands we repair
Appliance repair discounts and coupons
Save on appliance repair in Wesley Chapel, Tampa and nearby cities. Pick an offer and mention it when you book.
$40 off Two appliances in one visit
20% off Preventive appliance maintenance
$30 off Senior appliance repair discount
Special pricing Appliance repair for landlords and property managers
$69 credited Diagnostic fee credited toward your repair
Other Appliance Repair Services
Areas we serve
Our technicians are based in Wesley Chapel and cover 21 communities across Pasco, Hillsborough, Pinellas and Citrus counties.
- Wesley Chapel
- Tampa
- Brandon
- Cheval
- Citrus Park
- Dade City
- Dover
- East Lake
- Homosassa
- Keystone
- Land O' Lakes
- Lutz
- Odessa
- Oldsmar
- Plant City
- San Antonio
- Seffner
- Trinity
- Valrico
- Westchase
- Zephyrhills
Neighborhoods
- New Tampa
- Tampa Palms
- Seven Oaks
- Connerton
Our base in Wesley Chapel Communities we serve
Don't see your community? We serve nearby areas too. Call (786) 650-0707 and ask.
Stove and cooktop questions
No. Recent moisture, burner assembly and control behavior provide important context. The cause needs assessment before a replacement part is recommended.
Not necessarily. Cycling can be normal. Describe whether the cooking result has changed, which setting is selected and the cookware used.
No. The size of the magnetic base and its position on the zone also matter. Tell us whether the same pan previously worked there.
A replacement glass panel may be available, depending on the model. Leave the surface unused while its condition, part availability and repair options are assessed.
Yes, oven heating and door faults are covered separately by our oven and range service. Tell us which section of the appliance is affected.
The full model helps identify the appliance, but diagnosis is still needed to establish the fault. We explain parts availability and any follow-up after the assessment.
