Appliance Repair
in Lutz, FL

The washer stops with water in the drum

A washer that ends a cycle full of water usually cannot pump it out. A clogged pump filter, a kinked drain hose or a pump that no longer runs are the common causes. On many front-loaders the filter sits behind a small panel at the bottom front.

If the water drains but the drum will not spin, the machine may be sensing an unbalanced load or a lid or door lock that does not engage. The technician tests each part before any replacement is priced.

Clothes need a second dryer cycle

Slow drying is often an airflow problem. Lint packed in the vent run makes the dryer work longer and hotter, so we check the exhaust path before blaming the heater. When the vent itself needs attention, our dryer vent cleaning covers it.

A dryer that tumbles with no heat at all points to the heating element or its safety fuses on electric models, and the igniter or gas valve coils on gas models.

Stacked pairs and combination units

A stacked washer and dryer are two machines in one frame, and each one can fail on its own. A combination washer-dryer does both jobs in a single drum. Tell us which kind you have when you book, so the technician brings the right parts information.