Ignition, heating and repeat-start faults
Gas Oven Repair in Wesley Chapel, FL
A working cooktop does not prove that the oven can light. Tell us what happens when you select Bake: silence, repeated clicking, a glow without heat or a burner that stops relighting.
What customers say about us
4.9 out of 5 from 155 reviews on Google
Read all customer reviews
-
Antón was very professional and cordial explain everything that was wrong with my oven and offer me several options on how to correct the problem.
Dream M.Oven Repair -
My oven stopped working. Called in the evening service appointment was offered next day. Professional, knowledgeable and completed the repair in a timely manner.
J G.Oven Repair -
SoS to the rescue. Fast efficient service. Very knowledgeable of G.E. Appliances. Quick diagnostic test and then ordered parts. Two days later my microwave was bavk in working order .
Pamela B.Microwave Repair -
Very good
Emmanuel E.Google review -
Outstanding Service!! Superior knowledge and experience!! Reasonably affordable (& Honest 😃)
HelloGoogle review -
Anton was available immediately when I needed him, got the OEM parts, and fixed my washer within 30 min after having an unbalanced loud, rocking washer for a few months. His prices are great and I’ll just say what he charged me was about what the manufacturer was going to charge me just for the diagnostic. I’ll be using him for all my future appliance repairs. Small businesses all day!
MBW0115Top Load Washer Repair -
Excellent service. Prompt repair. Highly recommend.
Karl S.Google review -
“I called needing my fridge fixed ASAP, and they showed up right on time, got it working perfectly, and didn’t waste a minute. The whole process was quick, easy, and stress-free. Reliable service like this is hard to find these days!”
Katie T.Refrigerator Repair -
Anton did an excellent job installing our new garbage disposal and ice machine in our refrigerator, he was efficient, friendly and personable
Chris N.Garbage Disposal Installation -
Antony got back to me within about 15 minutes and was able to come out the same day. Very professional as well as personable. He showed me what the problem was on my leaking refrigerator and even cleaned that area after the repair. Not only will I hire him again if needed, but I highly recommend his services.
Betsy R.Refrigerator Repair - Read customer reviews from our customers on Google
First identify how this oven lights
Gas ovens do not all use the same ignition system. Many use a hot-surface glow bar. Others use direct spark ignition. Older pilot models have another arrangement. The model number determines the circuit and the checks that belong to it.
SOS assesses the oven section of gas ranges and gas ovens in Wesley Chapel. We check the reported behavior, identify the ignition design and explain the findings before you approve a repair. A glowing part or an error code alone is not a parts order.
For a problem with the burners on top, see gas stove repair. Household supply piping and utility-side work need the appropriate gas professional.
What happens before the heat disappears?
Cooktop works, oven stays cold
Signs
Surface burners operate but Bake does not produce heat.
What the assessment considers
Oven settings, power to the oven circuit, its ignition system and model-specific gas controls. Working surface burners do not clear the entire oven supply path.
A glow without useful heat
Signs
You have noticed an orange glow but the oven does not warm normally.
What the assessment considers
On a glow-bar design, the igniter, its supply and the valve circuit need checking together. A glowing igniter can still draw too little current to open the valve, so the current is measured.
Clicking that never becomes heat
Signs
The oven repeatedly tries to start, or reports a fault after trying.
What the assessment considers
Whether this model uses spark ignition, then the ignition and flame-detection path specified for it. A glow-bar diagnosis cannot simply be transferred to a spark system.
A loud bang at ignition
Signs
Lighting produces a boom or moves the door.
What the assessment considers
Possible delayed ignition requires service. Leave the oven unused. Do not keep starting it to demonstrate the noise.
Starts once, then fails to recover
Signs
Preheat begins, but the oven cools and does not resume heating as expected.
What the assessment considers
Normal temperature cycling versus a failure to relight. The point in the cycle and whether the fault occurs only when warm help guide testing.
Bake and Broil behave differently
Signs
One cooking mode works while the other does not.
What the assessment considers
The actual burner and control layout. Some models have separate systems. Others use a lower broiler arrangement. Two modes do not automatically mean two igniters.
If you smell unburned gas
Leave the building with everyone else. Do not operate the oven, electrical switches or a phone inside. From outside and away from the suspected leak, call your gas utility emergency line or 911.
Do not wait for an appliance appointment or return until the responding professionals say it is safe.
If the oven bangs when it lights
A loud ignition bang needs attention even if the oven subsequently heats. Leave it unused and describe the event when arranging service. Repeated attempts are not a useful homeowner test.
A quiet cycling sound can be normal on some models. A new or forceful noise should be assessed in the context of the appliance and its operation.
Useful details from the last failed cycle
| What you already noticed | What to tell us | Why it helps |
|---|---|---|
| The selected mode | Bake, Broil or another named setting | Identifies the requested heating circuit. |
| When the problem starts | Immediately, after preheat or after a period of cooking | Separates initial ignition from a warm restart issue. |
| Sound or display | Clicking pattern or the exact displayed message | Preserves the symptom without guessing a failed part. |
| Recent changes | Installation, moving the range, cleaning or a power interruption | Identifies changes to consider during diagnosis. |
| Appliance identity | Full model number and known natural gas or propane setup | Selects the correct instructions and parts information. |
Use observations you already have. Do not run an unsafe oven again, remove panels or move the range to collect this information.
Three ignition arrangements
Hot-surface ignition
The glow bar and its associated valve circuit are checked to the model specifications. Brightness alone cannot confirm the electrical performance needed for ignition.
Direct spark ignition
An electrode produces the ignition spark. Diagnosis follows that design, including the appropriate control, wiring and flame-proving checks.
Older pilot systems
Pilot arrangements require their own identification and assessment. Provide the model when booking so the appliance and service needs can be reviewed.
A gas oven uses one of these arrangements, and the model number shows which.
Checking the oven when the cooktop still works
They show that the cooktop can operate, while the oven has its own controls and gas passage. GE describes models on which an oven regulator lever can be off while the surface burners still function, particularly after installation.
That is a model-specific possibility for the technician to assess, not an instruction to reach behind the range or adjust its regulator. Tell us if the failure began immediately after the appliance was installed or moved.
Manufacturer reference: GE: oven does not heat while the burners work.
Why the gas oven flame goes out during a bake
Once a gas oven reaches its target temperature, its heat source normally cycles, so a flame that goes out is often doing its job. The question is whether the oven resumes heating and maintains the expected cooking performance.
A report that it lights from cold but repeatedly fails later is more useful than simply saying the flame goes out. Testing should follow the manufacturer procedure. Opening the door can change operation on some designs.
References: GE gas range operation and Whirlpool-published gas range guide. Instructions for your exact model take priority.
From the reported fault to a checked result
- Identify the applianceReview the model, fuel setup and what happened during the failed cycle.
- Assess the correct systemFollow the ignition design and investigate the reported operating condition.
- Agree the repairExplain the finding, proposed work and estimate before proceeding.
- Verify operationAfter approved work, check the affected cooking mode and explain the result or any remaining issue.
Parts belong to the full model number
Igniters can differ in electrical requirements, mounting and connections even when they look similar. We identify the replacement from the complete model information and applicable parts listing.
Tell us about a known propane conversion or previous gas-system work. Appliance repair does not automatically include a fuel conversion or changes to household piping.
For other cooking appliances, see oven and range repair, electric oven repair or wall oven repair.
Gas oven brands we service
Appliance repair discounts and coupons
Save on appliance repair in Wesley Chapel, Tampa and nearby cities. Pick an offer and mention it when you book.
$40 off Two appliances in one visit
20% off Preventive appliance maintenance
$30 off Senior appliance repair discount
Special pricing Appliance repair for landlords and property managers
$69 credited Diagnostic fee credited toward your repair
Other Appliance Repair Services
Areas we serve
Our technicians are based in Wesley Chapel and cover 21 communities across Pasco, Hillsborough, Pinellas and Citrus counties.
- Wesley Chapel
- Tampa
- Brandon
- Cheval
- Citrus Park
- Dade City
- Dover
- East Lake
- Homosassa
- Keystone
- Land O' Lakes
- Lutz
- Odessa
- Oldsmar
- Plant City
- San Antonio
- Seffner
- Trinity
- Valrico
- Westchase
- Zephyrhills
Neighborhoods
- New Tampa
- Tampa Palms
- Seven Oaks
- Connerton
Our base in Wesley Chapel Communities we serve
Don't see your community? We serve nearby areas too. Call (786) 650-0707 and ask.
Questions about gas oven service
Does an orange glow prove the igniter is good?
No. On a hot-surface system, an igniter can produce visible light without establishing that the circuit operates to specification. Diagnosis considers the supply, igniter and valve circuit together.
Why can the stove work while the oven does not?
The cooktop and oven have different operating components. Settings, the oven ignition circuit or a model-specific gas control can prevent oven heating even when the top burners operate.
Is clicking always an igniter failure?
No. First establish whether the oven uses spark ignition and whether the sound is part of normal cycling or an unsuccessful start. Its timing and any displayed message help guide diagnosis.
Should I keep trying an oven that lights with a bang?
No. Leave it unused and arrange service. If there is an unburned-gas smell, leave the building and call the utility emergency line or 911 from outside instead of waiting for a repair appointment.
Can a gas oven work during a power outage?
Many gas ovens require electricity for their ignition and controls. Do not assume that an available gas supply makes the oven usable, and do not try to light an electronically ignited oven with a match.
What should I send when booking a propane oven?
Send the full model number, the symptom and any known fuel-conversion history. That allows the appliance and scope to be reviewed. Tank service, supply piping and conversion work are not assumed to be part of an oven repair.
Updated
